ImgArchive contains an internal basic EXIF reader. When an image is presented at import, This reader will attempt to read any EXIF data found in the image. If the reader can read the Exif data from the image file then the list below will be the tags it will attempt to read.
Image description
Camera manufacturer's name
Camera model
Image orientation
Number of bits per component
Software used
File change date and time
Original file date and time (may not exist)
Digitization date and time (may not exist)
Sub-second time that original picture was taken
File copyright information
Short Rating tag used by Windows
Rating tag used by Windows, value in percent
Exposure time in seconds
F/stop
ISO speed
Shutter speed (reciprocal of exposure time)
Exposure bias value in EV
The class of the program used by the camera to set exposure when the picture is taken.
Distance to focus point in meters
Focal length of lens in millimetres
Focal length in 35mm film
Flash.
Metering mode
Image width reported in EXIF data
Image height reported in EXIF data
The kind of light source.
White balance mode set when the image was shot.
Digital zoom ratio when the image was shot.If the numerator of the recorded value is 0, this indicates that digital zoom was not used.
Type of scene that was shot. It can also be used to record the mode in which the image was shot.Note that this differs from the <SceneType> tag.
Contrast applied by the camera when the image was shot
Saturation applied by the camera when the image was shot
Sharpness applied by the camera when the image was shot
Distance to the subject.
Latitude
Longitude
Altitude
If an external reader is installed then this reader will also be used to read EXIF data.